Electric RolloPort S2 garage door drive - for convenient garage door control RolloPort S2 is an electric garage door motor that can be used to control all common up-and-over and sectional doors. It provides extensive comfort functions such as automatic door closing, soft-start/soft-stop and a power LED for indoor lighting, which switches off automatically after three minutes. In addition, it has obstacle detection with a reversing function. The time span for the door closing can be set as you wish and is then implemented completely automatically. Two two-channel micro handheld transmitters, which can be used to control the drive via radio waves, are included. Manual control is still possible in the event of a power failure. RolloPort S2 also has an alarm function. If this is enabled, a beep will sound as soon as the door is open for longer than ten minutes. Technical information: - Power consumption: 100 W - Tensile force: 700 N - Maximum door size: 10.5 m - Minimum drop: 6 cm - Door speed: up 11 / 15 / 11 cm/s, down 11 cm/s - Ambient temperature during use: -20 °C to + 40 °C - Handheld transmitter: radio frequency 433 MHz, range max. 50 m outdoors Included: - 1 x drive - 1 x user manual - 2 x micro handheld transmitters - 1 x door tie, curved - 2 x centre suspensions - 3 x mounting brackets - 1 x camber angle - 1 x door angle - 1 x multi-tooth connector - 8 x hexagonal self-tapping screws (6 x 15 mm) - 1 x screw (6 x 80 mm) with a hexagonal nut - 1 x bolt (8 x 20 mm) - 1 x safety splint (2 x 20 mm) - 4 x screws (8 x 20 mm) with a hexagonal nut and a washer - 6 x rawlplugs (10 mm) - 6 x hexagonal screws (8 x 60 mm) - 1 x impact mandrel - 2 x perforated tape angles - 3 x tracks + 2 x connectors - 1 x external release
